The exchange line access number on the PBX is 0 in the factory
settings; however, this can be changed (Réseaux publics > Indicatif).
Note that changing the exchange line access number restricts the phone
numbering plan.
The overview can be viewed and printed (
the Configuration Manager by opening the page Synthèses > Plan de
répartition des numéros.
The phone numbers can be shown in the Synthèse globale or Groupé
par type.
In the overview Groupé par type click
numbers.
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
Configuration Manager
Documents imprimés) in
for a type to list the configured
Synthèses
385