Auerswald COMpact 5200 Advanced Information page 135

Proceed as follows to set up emergency calls:
• switching emergency call ability for external connections, providers and
accounts on/off.
– Using the Configuration Manager (on the pages that follow)
– Réseaux publics > Connexions RNIS > Liasion Point-Multi-Point
(PMP)
– Réseaux publics > Connexions RNIS > Numéro Principal
d'abonnement/Faisceau (NDI) > Configurer
– Réseaux publics > Connexions analogiques
– Réseaux publics > Voix sur IP (VoIP) > Fournisseur > Configurer
– Réseaux publics > Voix sur IP (VoIP) > Comptes > Configurer
• Configuring emergency calls.
– Using the Configuration Manager (page Réseaux publics > Appels
d'urgence)
Note: Public emergency numbers are set as default settings when you
select the country settings (using the configuration wizard), when
commissioning the PBX. These numbers cannot be deleted. You can
only enter different public emergency numbers as default settings by
changing the country settings at a later point in time. Be aware of any
possible conflicts between the country-specific emergency numbers and
the existing internal phone numbering plan. If necessary, assign new
"Internal numbers".
• If necessary, configuring the country in which the PBX is operated.
– Using the Configuration Manager (Administration > Données
constructeur/opérateur page)
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
Functions, Uses, Concepts
Emergency Calls
135