Auerswald COMpact 5200 Advanced Information page 466

Settings – Réseaux publics
Connexions RNIS
Select the country for this exchange line.
Copier les paramètres vers Exécuter
The settings of this port can be copied an transferred for another port.
Informations de coûts
Requirements:
• Charge information provided by the network provider

The PBX stores the charge information sent by the network provider
and uses it to evaluate individual calls.
Important:
Disabling this function is only advisable if it causes problems on the
external connection (this depends on the network provider/country).
Some telephony providers do not send charge information. If this type of
provider is being used, you cannot apply any charges to a particular call.
Notes:
You cannot check exactly how many PBXs should be charged for each
call because, for example, you cannot uniquely assign the charges to
one of the two subscribers involved in a query call from an external call.
If you are using the Soft-LCR 4.0 LCR procedure, the duration of the call
and your own table of tariffs are used to calculate the charges.
466
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018