Settings Door Call - Auerswald COMpact 5200 Advanced Information

Voip pbx for medium sized business

Hide thumbs Also See for COMpact 5200:

Table of Contents

Settings Door Call

Proceed as follows:

Separately for door calls

Using the Configuration Manager (page Périphériques > Interphones

> Appels d'interphone >

Requirements:

Configured door call

Configuration de l'appel d'interphone

Select the door call you want to configure.

Séquence DTMF

Requirements:

Created switch input for an analogue device

Specifies which DTMF sequence the PBX detects, for example,as the

actuation of a door bell button to then trigger an alarm or a door call. For

information about which DTMF sequences the connected device sends, see

the manual of the device in question.

Note: The DTMF sequence usually is the phone number assigned to the

door bell button within the door terminal.

COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018

Settings – Périphériques

Compact 5200r Compact 5500r