Click Ok.
Note: To create further configurations for a door call or the corre-
sponding switch input, click
The configuration is described below and in the chapter Functions >
Switch input.
Deletes the switch input or opens the configuration of the door call.
Settings Door Terminal
Proceed as follows:
•
Separately for door terminals
•
Using the Configuration Manager (page Périphériques > Interphones
> Configurer)
Requirements:
•
Created door terminal
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
in the line of the corresponding door call.
Settings – Périphériques
Interphones
741