Functions, Uses, Concepts
Service Data
•
D-channel option selected in the PBX
1. Start the D-channel decoder computer programme.
2. Click Démarrer.
3. In the Interface list field, select the IP option.
4. Enter the IPv4 address or, as of decoder version 2.6.7, the IPv6 address
of the PBX in the Adresse IP entry field.
Note: If a port is present, omit it when you enter the IP address.
5. Click Ok.
The protocol log is displayed.
6. Click Pause to stop the protocol being recording.
Further steps:
174
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018