Auerswald COMpact 5200 Advanced Information page 239

When dialling phone numbers, the exchange line request type configured
for the subscriber must be noted. The PBX distinguishes three types of
exchange line requests:
Poste interne: The user has to dial an external number with preceding
exchange line access
Poste directement raccordé à la ligne principale: For an external number
no prefix is required. However, the user has to dial an internal number with
preceding **.
Indicatif automatique (factory setting): Neither for the internal nor for the
external number a prefix is required. The PBX automatically distinguishes
between internal and external numbers with the adjustment of the dialled
phone number and the internal numbering plan:
• If the phone number is contained in the phone numbering list, the PBX
establishes an internal connection.
• If the phone number is not contained in the phone numbering list the
PBX establishes an external connection.
Notes:
The behaviour of the phones COMfortel 1400 IP/2600 IP/3200/3500/
3600 IP when dialling phone numbers depends on the configured default
account (see manual of the phone). With the phones COMfortel 1400 IP/
2600 IP/3600 IP as of firmware 2.4 the default account can be
configured depending on the exchange line request type.
The short code number is a part of the internal numbering plan and is
therefore an internal number. However it leads to an external
connection.
To avoid conflicts between 3 or 4 digit phone numbers of the local area
network and the internal numbering plan, phone numbers of the local
area network should always be dialled with local area code. In countries
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
number.
Phoning
Outgoing Calls
239