Auerswald COMpact 5200 Advanced Information page 749

Voip pbx for medium sized business

Hide thumbs Also See for COMpact 5200:

Table of Contents

A relay with the operating mode Parler, which is enabled during the

loudspeaker announcement, is assigned to the alarm. This relay can be

used to switch over the loudspeaker area of the loudspeaker system, for

example, or to switch on an additional lamp which draws attention to the

announcement.

If suitable relays have already been configured on the page Périphériques

> Relais (actionneurs), a list field will appear now. Select one of the

existing relays and click

If you do not want to use any of the existing relays, select New relays in the

list field (

cancels the operation). Enter a freely selectable name for the

relay and click Ok.

Note: Alternatively, you can also create and assign relays on the page

Périphériques > Relais (actionneurs).

For a detailed description of the operating modes, refer to the chapter

Functions, Uses, Concepts > Relays (Actuators) > Relay Operating

Link to the page Périphériques > Relais (actionneurs)

Deletes the relay or opens the configuration of the relay.

COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018

Settings – Périphériques

Interfaces de paging

Compact 5200r Compact 5500r