Auerswald COMpact 5200 Advanced Information page 629

Poste interne
For external calls, the prefix of the
required.
Poste directement raccordé à la ligne principale
When picking up the receiver, an external line is requested instantly. For
internal calls, the prefix
Direct exchange line request
The PBX automatically distinguishes between internal and external
numbers with the analysis of the digit sequence and the adjustment of the
dialled phone number and the internal numbering plan.
Notes:
The selection Direct exchange line request is only available for IP
DECT phones as well as COMfortel 1200 IP and COMfortel C-400. If you
want to use this function for other phones, you must switch on the
system-wide automatic exchange line request (page Administration >
Indicatif).
The behaviour of the IP system phones when picking up the receiver,
depends on the default account selection (see manual of the phone). For
some IP system phones, the default account can be determined by the
settings for the exchange line request of the PBX.
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
Exchange line access number
** is required.
Settings – Abonnés (Abo)
Propriétés / Synthèse des fonctions
is
629