Auerswald COMpact 5200 Advanced Information page 462

Settings – Réseaux publics
Connexions RNIS
cally performs a 1:1 assignment for the extension numbers in the exten-
sions block. If an extension cannot be assigned, the fallback call
distribution function is enabled.
If you want an extension number to be different from the ones used in
linear call distribution, or if an extension number is needed for a different
function (e.g. remote configuration, CLIP no screening), you must also
enter it in the phone number list (page Réseaux publics > Connexions
RNIS > Numéros Directs (SDA) en PTP).
For example, for extensions block 0 to 99: enter extension 0 as an
extension and assign it in the call distribution.
For example, for extensions block 00 to 99: enter the individual
extension numbers 00 to 09 as an extension number and assign them
during call distribution. The PBX will then only react when the number of
places is reached, for example, if the caller dials 00 as an extension
number. In contrast, if the caller only dials 0, the fallback call distribution
function is enabled as soon as the time for selecting a suffix dialling digit
has passed.
You must enter all the extension numbers for a PTP connection that is
not running linear call distribution.
Passerelle GSM

The S port supports the GSM gateway connected to it. Any phone
0
numbers can be used for the connection. They must be entered in the PBX
and GSM gateway configurations.
Notes:
When you configure the GSM gateway, you must also input the
connection type of the ISDN connection.
462
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018