Auerswald COMpact 5200 Advanced Information page 547

Routing via exception numbers (VoIP + GSM)
Requirements:
• Configured exception numbers (page Routage > Routage VoIP/GSM >
Numéros de téléphone d'exception)
• Enabled call forwarding method 2. B channel

The device checks whether the destination number involved in call
forwarding for external numbers has been set up as an exception number.
If so, the call is sent along the configured path. If the destination number has
not been entered in the routing table, the call to be forwarded is sent either
via a free call channel that is assigned to the port or via any free call channel
(For call forwarding via the PBX, use any available call channel).
Utiliser identité en départ en cas de transfert d'appel
Requirements:
• CLIP no screening enabled for this VoIP account

In the case of call forwarding via the external connection, the phone
number of the caller is transmitted to the destination of the call forwarding.
In the case of an anonymous call, the function acts as if not enabled.

The phone number in the PBX is transmitted to the call forwarding
destination.
CALL FORWARDING UNCONDITIONAL (CFU)
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
Settings – Réseaux publics
Voix sur IP (VoIP)
547