Auerswald COMpact 5200 Advanced Information page 753

Voip pbx for medium sized business

Hide thumbs Also See for COMpact 5200:

Table of Contents

The default exchange line access number on the PBX is 0 in the factory

settings. However, this can be changed. Note that changing the

exchange line access number restricts the phone numbering plan.

Freely selectable name. This name is used to identify the alarm within the

Activer alarme

The alarm input is disabled. It is not possible to initiate an alarm.

The alarm can be initiated only once. Subsequently, the alarm input will be

disabled and will have to be enabled once again.

After an alarm is triggered off, the alarm input continues to be enabled. A

further alarm can be triggered off.

Opens the configuration of the alarm.

COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018

Settings – Périphériques

Compact 5200r Compact 5500r