Auerswald COMpact 5200 Advanced Information page 812

Settings – Fonctions
Standard automatiques SVI
Waiting time between the announcements or until transfer to the
default destination
Specifies how long the PBX waits (in seconds) for a valid input between and
after the announcements.
Comportement si occupé/non-réponse de la cible
If the caller enters a valid suffix dialling digit, the destination subscriber is
notified that a call is present.
If the call is not answered, the announcement if the destination is busy/does
not reply is played.
If the destination is busy, call waiting is enabled provided that the destination
subscriber has enabled this function. If he rejects the call waiting call, the
announcement if the destination is busy/does not reply is played.
Note: For internal calls, it is tried to reach the destination number for
max. 2 minutes, external calls for max. 8 minutes. This time depends on
the settings made. VoIP and ISDN subscribers, for example, can only be
called for 3 minutes if the call is not answered.
812
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018