Auerswald COMpact 5200 Advanced Information page 982

Settings – Administration
Configuration à distance
You must select the DDI number to be sent for a PTP connection from
the extensions block. If the DDI number is then displayed in red text,
either it is not in the value range, or the maximum number of external
phone numbers has already been entered.
Autorisation pour la configuration à distance
Dealer access number X
Specifies the connection from which the PBX can be configured remotely
without manual release. To do this, the PC connected to the PBX via an
external ISDN connection must send the dealer access number that is
entered here.
Notes:
Enter the phone number along with its local area code.
If you do not enter a dealer access number, or if the transmitted number
does not match the number you enter, you must dial a character string
on an internal phone to unlock the PBX for remote configuration.
982
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018