Auerswald COMpact 5200 Advanced Information page 953

The Power LED remains lit in green until all of the calls are terminated or
until the end of the waiting time. If all calls, all connections to/from the web
server and all data services are terminated, the PBX will perform a restart
(even before the defined time has elapsed). If a call (a connection) is active
after the time has elapsed, this call will be interrupted to perform the restart.
The Power LED lights up/flashes in red and orange for up to two minutes.
If the Power LED lights up in green again, the restart is complete and the
PBX is ready for operation.
Note: If the Power LED remains continuously lit in red, an error has
occurred. Please contact your dealer or the manufacturer directly.
Minutes
Select a timeframe until restart or power down.
Arrêt du système de télécommunication
Arrêter
Requirements:
• Configured timeframe until power down under Redémarrer le système
de télécommunication (reboot)
As soon as the Power LED is red, you can pull the power plug of the PBX
and accessory equipment – if required – out of the socket.
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
Settings – Administration
Mise à jour/Redémarrage du firmware
953