Auerswald COMpact 5200 Advanced Information page 117

For situations where your settings are supposed to apply even after config-
uration switchovers, you can use the so-called permanent configuration. If
permanent configuration is enabled, the configuration-dependent settings
will be overridden by the permanent configuration settings.
The following functions can use the permanent configuration:
• Call forwarding of one's own external number (CF for MSNs, DDI
numbers, or additional numbers)
• Readiness of the voice mail/fax boxes
Proceed as follows for configuration:
• Creating sonfigurations.
– Using the Configuration Manager (page Calendriers > Configura-
tions)
• Making settings configuration dependent.
– Using the Configuration Manager (on the following pages)
– Réseaux publics > Acheminement des appels
– Réseaux publics > Transfert d'appel
– Subscriber (scr) > Profils
– Périphériques > Boîtes de messagerie vocale/télécopie > Profils
– Périphériques > Interphones
– Périphériques > Relais (actionneurs)
– Routage > Routage VoIP/GSM > Routing is configuration
dependent
• Switching the authorisation for configuration switching for the involved
internal phones on.
– Using the Configuration Manager (page Subscriber (scr) >
Propriétés > Droits)
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
Functions, Uses, Concepts
Configuration Switchover
117