Auerswald COMpact 5200 Advanced Information page 444

Voip pbx for medium sized business

Hide thumbs Also See for COMpact 5200:

Table of Contents

Settings – Réseaux publics

Connexions RNIS

Niveau de sélection

The selection of the dial level (Location, National, International) is country-

specific. Depending on the country and the settings for the local area code

above, a dial level must be selected (example: In Belgium, local area codes

do not exist. Here, the dial level Location must not be selected).

Note: After the port settings once have been made correctly, no further

changes should be made.

Source suitable for clock synchronisation

This port is used as source for the clock synchronisation and serves

as clock master for the PBX. Thus, interfering noise during calls are

Note: Select a port a source that is synchronous to the ISDN exchange

Conserver la couche 1 active de manière permanente

Requirements:

Constructions)

COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018

port (optional, see Technical Data in the Operating

Compact 5200r Compact 5500r