Auerswald COMpact 5200 Advanced Information page 734

Settings – Périphériques
Assistant de périphériques
Configure Loudspeaker Announcements
The announcement output can be created with the device wizard. Various
devices supported by the PBX that can be used as announcement output
are available as device templates for this purpose. Their factory settings
already include several default values for operation of the announcement
outputs.
If no of the device templates on offer matches your installation, you can
select a user-defined device template.
Numéro de téléphone
This is an internal number. You can select any of the numbers in the internal
supply of phone numbers. This number can be called directly by an internal
subscriber. (Entry on page Périphériques > Assistant de périphériques)
Notes:
A number cannot be allocated twice.
Using numbers with few digits (two- or three-digit numbers) inevitably
restricts the possible supply of numbers that require more digits. For
example, if the phone number 12 is assigned, the phone numbers 120
to 129 and 1200 to 1299 are no longer available.
The default exchange line access number on the PBX is 0 in the factory
settings. However, this can be changed. Note that changing the
exchange line access number restricts the phone numbering plan.
734
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018