Auerswald COMpact 5200 Advanced Information page 968

Settings – Administration
Configuration IP
DHCP SERVER SETTINGS FOR NET MODULE
When connecting SIP devices to the 2
enabled the DHCP server in order to supply the SIP devices with IP
addresses and other information (NTP server address, gateway address
etc.).
Utiliser le serveur DHCP
Requirements:
• If internal and external VoIP telephony are to be connected at the same
network interface: Disabled Disposer automatiquement de l'adresse
IP (client DHCP) (page Administration > Configuration IP under NET
MODULE)
Begin of DHCP address range
Fin du domaine d'adresse DHCP
Enter begin and end of the IP address range from that the IP addresses are
to be assigned. Only IP addresses within the changeable range of the corre-
sponding network class can be entered.
968
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
nd
network interface, it is advisable to