Auerswald COMpact 5200 Advanced Information page 740

Settings – Périphériques
Interphones
Click the second
sponding door terminal.
Enter a name for the switch input in the Entrée entry field.
Enter a value under Séquence DTMF (for analogue door terminals) or
Invite SIP (for VoIP door terminals). To detect that the alarm has been
triggered, e. g. because a door bell button has been pressed, the PBX
needs to know which DTMF sequence or which SIP invite the connected
device sends in this case (see manual and settings of the device in
question). The DTMF sequence or the SIP invite usually is the phone
number assigned to the door bell button within the door terminal.
In the Numéro de téléphone composé list field, select the required call
destination. Or after selecting Enter destination number, in the Numéro
de téléphone composé entry field, enter the required call destination.
Possible entries:
External number
Short-code number
Internal number of the individual phone
Internal phone of the group
Note:
The call destination is first entered identically for all configurations. It can
be changed afterwards.
If a door call should also be executed via VoIP accounts or GSM
gateways, in any case the external number must be entered with the
corresponding city code, even if it is the local prefix.
740
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
under Door calls + relays in the line for the corre-