Auerswald COMpact 5200 Advanced Information page 842

Voip pbx for medium sized business

Hide thumbs Also See for COMpact 5200:

Table of Contents

Settings – Fonctions

Utiliser PBX Call Assist

Requirements:

PBX Call Assist function enabled (optional, see chapter Functions,

Uses, Concepts > Activation)

PBX Call Assist is a CTI software available from Auerswald. Its use must be

switched on in the PBX.

All available TAPI lines are administrated by the corresponding server

software UCServer. Other TAPI applications cannot be used in parallel.

Further steps:

Install the server and client software. You will find the installation files on

the Internet (see www.auerswald.de/service).

Selects a LAN TAPI subscriber from the configured phones and adds it to

the list. All subscribers that should be controlled over a PC must be

configured for LAN-TAPI.

Note: If PBX Call Assist is switched on, all available TAPI lines will

instead be administrated by the corresponding UCServer server

COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018

Compact 5200r Compact 5500r