Sub-System Operation - Auerswald COMpact 5200 Advanced Information

Sub-System Operation

The PBX supports sub-system operation on a higher-level PBX, for example
to connect an external office to headquarters.
Requirements:
• At least one free internal VoIP channel for the main PBX
• At least one free external VoIP channel for the subordinate PBX
Proceed as follows to configure the main PBX:
• Creating VoIP subscribers in the main PBX.
– Using the Configuration Manager (page Abonnés (Abo) > Numéros
de téléphone >
Note: The corresponding subscribers in main and subordinate PBX
must have the same internal phone number.
– Module/Port: VoIP
– Type de périphérique: Téléphone VoIP par défaut
• Switching internal phone on for each subscriber.
– Using the Configuration Manager (page Abonnés (Abo) > Numéros
de téléphone > Configurer > Paramètres)
– Indicatif: Poste interne
Proceed as follows to configure the subordinate PBX:
• Creating subscribers in the subordinate PBX.
– Using the Configuration Manager (page Abonnés (Abo) > Numéros
de téléphone >
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
Nouveau)
Nouveau)
Functions, Uses, Concepts
Sub-System Operation
189