Initiating External Callback On No Response - Auerswald COMpact 5200 Advanced Information

Phoning
Unsuccessful Outgoing Calls

Initiating External Callback on No Response

If you initiated a callback, you call the subscriber you did not reach previ-
ously as soon as he is available again.
Requirements:
• Service feature CCNR (callback on no response) is enabled by the
network provider.
• Use of an external S
the Instructions)
Important:
On system phones, this function is called via the menu/phone app
(optional, see manual for the phone).
To use this function at ISDN phones or to delete it again, this function
must be supported via a function key or via the menu by the respective
phone (optional, see manual for the phone).
Note: Some analogue phones permit this function via the T-Net function
key/menu (optional, see manual for the phone).
If the subscriber does not answer your call proceed as follows:
1. Press the Flash key or the Query key.
2. Dial *37#.
Note: If you do not hear a confirmation tone, the callback request was
not successful.
260
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
port for the call (optional, see Technical Data in
0