Auerswald COMpact 5200 Advanced Information page 341

Configuring Call Forwarding on Busy (on an Internal Phone)
## 96 Own number
Own number
Destination
number
Additional infor-
mation
Enabling Call Forwarding on Busy without Re-entering the Number (on
an Internal Phone)
## 96 Own number
Own number
Additional infor-
mation
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
# * 67 *
Own phone number (number without exchange line
access number (unaffected by a direct exchange line
phone))
The 1st number can be omitted if call forwarding is to
be configured for the number currently sent by the
phone.
External number to be called
External number (for exchange line request type
Internal phone: with preceding exchange line access
number)
Authorisation required
Authorisation for external destination required
Permanent configuration is enabled.
# * 67 #
Own phone number (number without exchange line
access number (unaffected by a direct exchange line
phone))
The number can be omitted if call forwarding is to be
configured for the number currently sent by the phone.
Authorisation required
The destination number may only be an external
number.
Permanent configuration is enabled.
Call Forwarding for External Numbers
Destination number
Short Reference
#
341