Auerswald COMpact 5200 Advanced Information page 813

Voip pbx for medium sized business

Hide thumbs Also See for COMpact 5200:

Table of Contents

The system then reacts according to the following setting.

Three short busy signals are played and the PBX ends the existing call.

Appel cible par défaut

The PBX transfers the existing call to the default destination number

entered below. If the call is not answered there either, three short busy

signals are played and the PBX ends the existing call.

Note: If the destination number and the default destination number are

identical, the PBX cuts off the call without calling again.

Nouveaux centraux téléph.

The PBX transfers the existing call to the automatic reception that was

called previously.

Annonce si occupé/non-réponse de la cible

Select the announcement to be played to a caller if the destination is busy

or does not reply. Make your selection from the announcements for

automatic receptions and the announcements before answering, or do not

select an announcement.

COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018

Settings – Fonctions

Standard automatiques SVI

Compact 5200r Compact 5500r