Auerswald COMpact 5200 Advanced Information page 417

Appel d'urgence uniquement avec code d'accès à la ligne principale
Requirements:
• Automatic exchange line request (also for individual subscribers)
disabled
– Using the Configuration Manager (on the following pages)
– Réseaux publics > Indicatif
– Abonné > Propriétés > Paramètres > Indicatif
– Abonnés (Abo) > Synthèse des fonctions > Paramètres >
Indicatif > Configurer

The emergency number must be dialled with the exchange line access
number entered under Réseaux publics > Indicatif (e. g. 0112 instead of
only 112). In this way, numbers beginning with 11... will remain available to
be assigned as internal numbers.

An emergency number can be dialled without exchange line access
number, but it is not possible to assign internal numbers which begin with
the first digits of an emergency number.
Important: Since the exchange line access number must be dialled in
advance if Appel d'urgence uniquement avec code d'accès à la
ligne principale is enabled, there is a risk that the exchange line access
number is forgotten in an emergency so that no emergency call can be
made.
Note: If you try to disable Appel d'urgence uniquement avec code
d'accès à la ligne principale after internal numbers beginning with the
first digits of an emergency number have been entered, an error
message will be displayed. Solve the problem by assigning new phone
numbers to the internal subscribers in question.
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
Settings – Réseaux publics
Appels d'urgence
417