Auerswald COMpact 5200 Advanced Information page 37

Also when the entered phone number correspond with the internal
phone numbering plan, the PBX waits up to 4 seconds for whether
additional digits for an external number are being entered, before it dials
the internal phone number. To avoid waiting time, you can subsequently
enter #. The PBX therefore recognises the input as finished and instantly
starts dialling.
In factory settings, the system-wide automatic exchange line request (for
all subscribers) is switched on. Alternatively, the exchange line request
type can be set separately for each subscriber. In this case, the
automatic exchange line request can only be selected for IP DECT
phones, COMfortel 1200 IP and COMfortel C-400. For all other
subscribers, only direct exchange line phone and internal phone can be
selected.
Proceed as follows for configuration:
• Making settings for exchange line request.
– Using the Configuration Manager (page Réseaux publics >
Indicatif)
• Making settings for exchange line request separately for subscribers.
– Using the Configuration Manager (page Abonnés (Abo) >
Propriétés > Paramètres > Fonctions spéciales)
Note: This setting is only visible, if Indicatif automatique au niveau du
système is disabled
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
Functions, Uses, Concepts
Exchange Line Request
37