Auerswald COMpact 5200 Advanced Information page 784

Voip pbx for medium sized business

Hide thumbs Also See for COMpact 5200:

Table of Contents

Settings – Calendriers

Configurations

Controllable with system relay: Aut.Konfig.um. (900)

Requirements:

Automatic configuration switchover is enabled

Automatic configuration switchover is controllable via phone.

Nom de configuration

Freely selectable name. This name is used to identify the configuration

within the PBX. (Select

Numéro d'identification

Automatically issued number. Is used for manual switching of a configu-

ration by a programming sequence.

Note: All previously assigned identification numbers can be viewed

sorted by number, name or type under Synthèses > Plan de répartition

des numéros d'identification.

The selected configuration is switched on.

Note: To switch off a configuration, switch on a different configuration.

COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018

Nouveau to enter.)

Compact 5200r Compact 5500r