Requirements:
•
External analogue port (optional, see Technical Data in the Instructions)
Connexion analogique
Select the analogue connection to be displayed/configured.
Connexion analogique
Apply country settings for
Accepts the country settings for the selected country.
Notes:
The analogue port has default settings that are required for analogue
ports in the country in which the PBX is operating. The settings are
specified by selecting the country when you set up the device for the first
time. Changes to the port must be made, for example, when connecting
a GSM gateway that was purchased in a different country and therefore
requires different default settings.
You do not usually need to change these default values. However, if you
do need to, follow the instructions from your network provider.
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
Settings – Réseaux publics
Connexions analogiques
425