Calling A Third Subscriber And Transferring To An Active Communication Partner - Auerswald COMpact 5200 Advanced Information

Phoning
Transferring
You will hear the confirmation tone.
4. Hang up the receiver.
The communication partner continues to listen to hold music.
As soon as the internal subscriber hangs up the receiver or one
subscriber logged in to the group becomes available, this communi-
cation partner is called. Once he accepts the call, he is connected with
the subscriber in the waiting loop.
Note: If the internal subscriber does not answer the call within 60
seconds or the line remains busy during the three-minute waiting time,
the call will be transferred back to you. If you pick up the receiver, you
will be reconnected with the communication partner. You can then place
him in the waiting loop again. If you do not pick up the call within 60
seconds, the connection is disconnected completely (for example, if
your line was busy even for a short time).
Calling a Third Subscriber and Transferring to an Active
Communication Partner
Assuming that you have gained an additional communication partner from
a call, e. g. from accepting a call signaled by call waiting, and this second
communication partner want to be transferred now to somebody else. You
274
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018