Auerswald COMpact 5200 Advanced Information page 966

Settings – Administration
Configuration IP
Adresse IP
Enter the IPv4 address in the range 0 to 255 (example: 192.168.0.240).
Reprendre immédiatement
The IPv4 address is immediately applied and the PBX is routed to the new
IPv4 address. After the rerouting, you need to log in again.
Reprendre en cas de redémarrage
The IPv4 address is not applied until the next time the PBX is restarted.
Masque de sous-réseau
Enter the IPv4 address of the subnet mask in the range 0 to 255 (example:
255.255.255.0).
Configuration IPv6
Opens the IPv6 configuration.
Mode IPv6
If IPv6 is switched on, an IP address complying with version 6 of the Internet
protocol can be assigned to the PBX. Thanks to the greater length of IPv6
addresses (eight blocks with four digits each, example:
966
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018