Auerswald COMpact 5200 Advanced Information page 469

Local area code
Phone number prefix (e. g. 0208 for Greater London).
Note: If there is no fixed digit sequence as the area code at the instal-
lation location of the PBX, no entry is required here.
Niveau de sélection
The selection of the dial level (Location, National, International) is country-
specific. Depending on the country and the settings for the local area code
above, a dial level must be selected (example: In Belgium, local area codes
do not exist. Here, the dial level Location must not be selected).
Note: After the port settings once have been made correctly, no further
changes should be made.
Source suitable for clock synchronisation

This port is used as source for the clock synchronisation and serves
as clock master for the PBX. Thus, interfering noise during calls are
avoided.
Note: Select a port a source that is synchronous to the ISDN exchange
line.
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
Settings – Réseaux publics
Connexions RNIS
469