Auerswald COMpact 5200 Advanced Information page 470

Settings – Réseaux publics
Connexions RNIS
Conserver la couche 1 active de manière permanente
Requirements:
• External S
0
Constructions)

An activation of the layer 1 is requested from the PBX as soon as the
layer is put into the idle state by the network provider. Thus, for example, a
delay time is avoided before the external dial tone indicates its action
readiness.
Temporisation de la langue si Setup-Ack avec Inband Info

Interfering noise during dialling phase are avoided.
Always send DTMF digit after inband info
Note: This is a country-specific setting (only relevant in Italy).

All outstanding digits are transferred via DTMF.
Aucun T310 pour boîtes d'informations
Note: This is a country-specific setting (only relevant in Italy).
470
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
port (optional, see Technical Data in the Operating