Auerswald COMpact 5200 Advanced Information page 755

If you do not want to use any of the existing relays, select Nouveau relais
in the list field (
the relay and select the device as whose part the relay is to be created in
the Ajouter à list field. Click Ok.
Note: The relay remains part of this other device (e. g. door terminal, IP
switch relay) in the configuration of the PBX, but takes over the selected
alarm function for the alarm.
For a detailed description of the operating modes, refer to the chapter
Functions > Relays (Actuators) > Relay Operating Modes.
Link to the page Périphériques > Relais (actionneurs)
Deletes the relay or opens the configuration of the relay.
Entrée
Requirements:
• Switch input (optional, see chapter Technical Data in the Instructions)
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
cancels the operation). Enter a freely selectable name for
Settings – Périphériques
Alarmes
755