Flux de données réseau
To log the network data stream, a network log (*.pcap) can be recorded. This
log can be evaluated (e.g.,with Wireshark/Ethereal), for instance, to
determine the cause of malfunctions.
Important:
Note the following legal notes prior to recording a network data stream.
The recorded network data stream may contain the following compo-
nents:
- Data streams of other computers in the network
- Connection data sets with destination, source, and time information of
a telecommunication connection
- The spoken word of both ends of a telecommunication connection
- Configuration data of the PBX and connected phones, as well as the
corresponding PINs and passwords
Before any recording, all participants in the telecommunication
connection must be informed that these contents will be recorded and
must also be informed who will use the recorded data.
If you want to make the recorded data available to your specialised
dealer or to the manufacturer for error analysis, you must make sure that
the legal requirements are fulfilled.
Proceed as follows:
•
Using the Configuration Manager
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
Configuration Manager
Surveillance
397
Need help?
Do you have a question about the COMpact 5200 and is the answer not in the manual?
Questions and answers