Auerswald COMpact 5200 Advanced Information page 545

Voip pbx for medium sized business

Hide thumbs Also See for COMpact 5200:

Table of Contents

Méthode de transfert d'appel

Call forwardings at the exchange line are configured and performed in

different ways. The exchange line, router or the provider determines which

of the call forwardings listed below can be used.

The call forwarding is controlled in the PTMP exchange line. The digit

sequence depends on the provider or router.

Call Defelection

Call forwarding shall be executed directly by the exchange line. The

PBX sends a corresponding message with new destination number to the

exchange line. Accordingly, the call is forwarded to the new destination by

the provider/exchange line.

Note: Currently, providers support Call Deflection only at the SIP Trunk.

2. B channel

The call forwarding is performed by the PBX during a call. It is possible

for all exchange line types but requires a free voice channel and the number

of the caller cannot be displayed unless CLIP no scrrening is used which is

not supported by many providers.

For call forwarding via the PBX, use any available call channel

Requirements:

Enabled call forwarding method 2. B channel

COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018

Settings – Réseaux publics

Voix sur IP (VoIP)

Compact 5200r Compact 5500r