Fournisseur
Aucun LCR
The dial attempt is initiated without a provider area code.
Émettre tonalité occupée
The dial attempt is ended and a busy signal is issued.
Provider name: The dial attempt is initiated using the area code entered
under Routage > Soft-LCR 4.0 > Providers.
Note: During the dial attempt, if the selected provider under
Fournisseur principal is busy, the selected provider under 1st fallback
provider is attempted, etc. If still no connection is established during the
dial with the 2nd fallback provider, a busy signal is issued.
Prix par connexion
Proceed as follows:
•
Separately for main provider, 1st and 2nd fallback provider.
Indicates the fee a provider charges for the establishment of a connection,
based on the currency entered in the PBX (page Fonctions > Crédits de
communication).
Prix par minute
Proceed as follows:
•
Separately for main provider, 1st and 2nd fallback provider
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
Settings – Routage
Soft-LCR 4.0
797