Auerswald COMpact 5200 Advanced Information page 535

Routage
Utiliser Soft-LCR 4.0 pour ce raccordement
Requirements:
• Network provider must support the dial-around service
• Configured prefixes (country prefix and local area code)
• Configured LCR (see Functions, Uses, Concepts > LCR section)

The VoIP connection is used for LCR calls.
Notes:
LCR must be disabled if the network provider does not support LCR.
However, you can always perform LCR manually by dialling a provider
area code prefix if the network provider supports the dial-around service.
LCR provider digit-recognition for this connection
Requirements:
• Disabled Adopt settings from PBX location (Germany)
The digits in the table below are the common LCR number prefixes in
Germany. For other countries, more LCR number prefixes (a total of 10) can
be entered.
Nombre de chiffres Les chiffres commencent par
5
6
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
010
0100
Settings – Réseaux publics
Voix sur IP (VoIP)
535