Subscribers
All connected end devices with telephony functions (phones, answering
machines, fax machines etc.) are set in the pbx as subscribers. To the
subscriber, a phone number and a series of properties are assigned.
Depending on the existing end devices there are analogue, ISDN and VoIP
subscribers.
Proceed as follows for configuration:
•
Creating a subscriber with an internal number.
– Using the Configuration Manager (page Abonnés (Abo) > Numéros
de téléphone)
•
Assigning properties to the subscribers.
– Using the Configuration Manager (on the following pages)
– Abonnés (Abo) > Profils > ...
– Abonnés (Abo) > Synthèse des fonctions
– Abonnés (Abo) > Propriétés
•
Configuring provisioning for IP phones.
– Using the Configuration Manager (on the following pages)
– Abonnés (Abo) > Provisioning d'IP > Paramètres
– Abonnés (Abo) > Provisioning d'IP > Gestion des fichiers
•
Making common settings for all subscribers.
– Using the Configuration Manager (page Abonnés (Abo) > Tous les
abonnés)
•
Assigning unassigned phones to a subscriber or deleting them.
– Using the Configuration Manager (page Abonnés (Abo) >
Téléphones non attribués)
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
Functions, Uses, Concepts
Subscribers
181
Need help?
Do you have a question about the COMpact 5200 and is the answer not in the manual?
Questions and answers