Auerswald COMpact 5200 Advanced Information page 779

Démarrage alarme
The Action URL will be assigned to the alarm type Démarrage alarme.
When an alarm is triggered, the Action URL is sent.
Note: If an alarm delay time was entered, the alarm call via the Action
URL starts after the alarm delay time.
Alarme confirmée
The Action URL will be assigned to the alarm type Alarme confirmée. As
soon as an alarm subscriber (configured under Devices > Alarms >
Configure > Alarm subscriber (destination number)) acknowlegded the
alarm, the Action URL is sent.
Note: A device that is not recognized by the PBX, cannot acknowlegde
an alarm call by entering the DTMF digit 0.
Expiration alarme
The Action URL will be assigned to the alarm type Expiration alarme. If
none of the alarm subscribers acknowledges the alarm, the alarm call ends
after the set alarm loops and the Action URL is sent.
Link to page Périphériques > Alarmes
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
Settings – Périphériques
URL d'action
779