Auerswald COMpact 5200 Advanced Information page 773

Settings – Périphériques
Relais (actionneurs)
Specifies how many milliseconds the pbx will wait before it sends DTMF
sequences to the connected device again. Possible entries: 0 to 10000 milli-
seconds.
Commuter
The PBX uses DTMF sequences to control the analogue relays. For this
purpose, the PBX needs to know which DTMF sequences the connected
device requires to switch the relay on or off (see the manual of the device in
question).
Requirements:
• Created analogue relay
Activer, Désactiver
Enter DTMF sequences required by the connected device. Possible entries:
Digits and the characters * and # and the comma ',' character as a pause of
half a second.
773
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018