Auerswald COMpact 5200 Advanced Information page 756

Voip pbx for medium sized business

Hide thumbs Also See for COMpact 5200:

Table of Contents

Settings – Périphériques

Created device (e. g. a door terminal) whose part the switch input is

(e. g. a still free door bell button)

A switch input that can be used to trigger the alarm, is assigned to the alarm.

In the list field, select one of the existing switch inputs and click

If you do not want to use any of the existing switch inputs, select Nouvelle

entrée de signal in the list field (

selectable name for the switch input and select the device as whose part the

switch input is to be created in the Ajouter à list field.

Enter a value under Séquence DTMF (for analogue door terminals) or

Invite SIP (for VoIP door terminals). To detect that the alarm has been

triggered, e. g. because a door bell button has been pressed, the PBX

needs to know which DTMF sequence or which SIP invite the connected

device sends in this case (see manual and settings of the device in

question). The DTMF sequence or the SIP invite usually is the phone

number assigned to the door bell button within the door terminal.

Note: The switch input remains part of this other device (e. g. door

terminal) in the configuration of the PBX, but takes over the selected

alarm function for the alarm.

Deletes the switch input or opens the configuration of the switch input.

COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018

cancels the operation). Enter a freely

Compact 5200r Compact 5500r