Settings – Réseaux publics
Voix sur IP (VoIP)
Désactivation de SIP Prack (RFC 3262)
The negotiation of SIP option „100rel" is disabled. This might be
necessary if the provider supports „SIP-Forking".
Numérotation en bloc uniquement Delay time after last digit dialled (3
to 15 sec.)
A connection is not set up to transmit the digits dialled here to the
provider until the delay time after the last digit is dialled has passed. All the
digits are then sent as a block. Time measurement restarts after the entry of
each digit. After the selected time has passed, the PBX recognises the most
recent digit as the final digit and will not allow any more numbers to be
entered.
Notes:
En-bloc dialling is a good idea, for example, when dialling single digits
causes problems in sub-system operation.
Select as short a time as possible, because the PBX does not forward
the entire phone number to the public exchange until the specified time
has passed.
Approximately three seconds is the default value for manual inputs.
SIPS Structure URL
Requirements:
•
External VoIP channel that supports SIPS (optional, see Technical Data
in the Instructions)
•
A certificate for the VoIP provider stored in the PBX
500
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018