Auerswald COMpact 5200 Advanced Information page 728

Voip pbx for medium sized business

Hide thumbs Also See for COMpact 5200:

Table of Contents

Settings – Périphériques

Assistant de périphériques

The default exchange line access number on the PBX is 0 in the factory

settings. However, this can be changed. Note that changing the

exchange line access number restricts the phone numbering plan.

Relay X, Switch input X

Enter the names of the relays and switch inputs.

Séquence DTMF

Requirements:

Expert settings

Enter the request that is assigned to the door bell button within the door

terminal. Possible entries: Digits and characters (Possible entries: *, #).

Numéro de téléphone composé

Select or enter the required call destination (external number, short-code

number, internal number of the individual phone, internal number of the

The call destination is first entered identically for all configurations. It can

be changed later.

If a door call should also be executed via VoIP accounts or GSM

gateways, in any case the external number must be entered with the

corresponding city code, even if it is the local prefix.

COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018

Compact 5200r Compact 5500r