Settings – Périphériques
Interfaces de paging
Settings Announcement Output
Proceed as follows:
•
Separately for announcement outputs
•
Using the Configuration Manager (page Périphériques > Interfaces de
paging > Configurer)
Requirements:
•
Created announcement output
Configuration de l'interface de paging
Select the announcement output you want to configure.
Activer la connexion
Terminer la connexion
Specifies which DTMF sequences the PBX uses to control the analogue
announcement outputs to enable or terminate the connection. For infor-
mation about which DTMF sequences the connected device requires, see
the manual of the device in question.
Note: You can use the comma ',' character as a pause of half a second.
750
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018