Removing And Installing, Tightening The Timing Belt - Skoda OCTAVIA MK1 Service Manual

Removing and installing, tightening the
timing belt
Note
Before removing the timing belt, mark
direction of running. Reversing the rotation
direction of an already used belt may
destroy it.
1 - Bottom toothed belt guard
unscrew to remove the vibration
–
dampener → Chapter
2 - Middle toothed belt guard
3 - 10 Nm
– replace
4 - Engine support bracket
– removing → Anchor
5 - 45 Nm
6 - Top toothed belt guard
7 - Timing belt
– before removing mark running direction
– check for wear
– do not kink
– removing → Anchor
– installing → Anchor
8 - 25 Nm
9 - Washer
10 - 100 Nm
to release and tighten use the
–
counterholder -MP 1-216-
11 - Camshaft sprocket
with sensor rotor for the Hall sensor
–
-G40-
Removing and installing timing belt
–
→ Anchor
– Installation position fixed by woodruff
28