Removing And Installing Clutch Position Sender G476 (Octavia Iil); Summary Of Components - Hydraulic System (Octavia Ll) - Skoda Octavia II 2004 Workshop Manual

Octavia II 2004 ➤ , Octavia II 2010 ➤ , Octavia III 2013 ➤ , Octavia III ...
Gearbox 0AF - Edition 09.2013
1.16 Removing and installing clutch position
sender - G476- (Octavia IIl)
Removing
– Push the driver seat as far as possible towards the rear.
– Disconnect the plug connection -arrow- at the clutch position
sender - G476- .
– Unlock catch -arrow- of clutch position sender - G476- -2- at
master cylinder -1- and remove.
Install
The installation is performed in the reverse order, pay attention
to the following points:
• The catch -arrow- at the clutch position sender - G476- must
not be damaged.
• The clutch position sender - G476- must click audibly into
place.
1.17

Summary of components - Hydraulic system (Octavia ll)

38
Rep. gr.30 - Clutch