Bypass Tray Paper Information Mismatch Rap; Foreign Device Interface Fault Rap - Xerox Phaser 3635MFP Service Manual

03-450 Bypass Tray Paper Information Mismatch RAP

03-450 The machine has detected a bypass tray paper colour, type or size mismatch during a
print job.
Procedure
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Perform the following:
1. If the fault is present when printing, check that the print driver and machine tray informa-
tion are correct.
2. Go to GP 4 System Administration Tools. Check that the relevant tray paper type, colour
and size settings are correct.
Draft 4
Phaser 3635MFP

03-510, 520, 558, 559 Foreign Device Interface Fault RAP

03-510 The foreign device interface is not detected.
03-520 The foreign device interface is not active.
03-558 The foreign device interface is not active.
03-559 The foreign device interface is no longer active.
Procedure
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Refer to Wiring Diagram 5. Perform the following:
1. If there is credit in the foreign device, check the wiring between the foreign device and the
foreign device interface PWB, PL 3.10 Item 7.
2. Check that the foreign device interface PWB is securely connected to CN13 the Main
PWB.
3. If necessary:
a. Install a new foreign device interface PWB, PL 3.10 Item 7.
b. Perform OF7 Main PWB Check RAP.
2-11
WARNING
Status Indicator RAPs
03-450, 03-510, 520, 558, 559