Net Module - Auerswald COMpact 5200 Advanced Information

NET Module

NET Module
Proceed as follows:
Using the Configuration Manager (page Administration >
•
Configuration IP)
Requirements:
Slot assigned with NET module (page Matériel > Sélection des
•
modules)
Disposer automatiquement de l'adresse IP (client DHCP)
Note: In the factory settings, DHCP is enabled.
The PBX receives its IP address automatically from the DHCP server.
Assigning IP address manually
Requirements:
• Disabled DHCP client
Adresse IP
Enter the IPv4 address in the range 0 to 255 (example: 192.168.0.240).
Reprendre immédiatement
The IPv4 address is immediately applied and the PBX is routed to the new
IPv4 address. After the rerouting, you need to log in again.
Reprendre en cas de redémarrage
COMpact 5200/5200R/5500R - Firmware V7.4A - Advanced Information V08 06/2019
- 1163 -