Microchip Technology megaAVR 0 Series Manual page 24

5.7.2.3 Temperature Sensor Calibration n
Name: TEMPSENSEn
Offset: 0x20 + n*0x01 [n=0..1]
Reset: [Temperature sensor calibration value]
Property: -
These registers contain correction factors for temperature measurements by the ADC.
SIGROW.TEMPSENSE0 is a correction factor for the gain/slope (unsigned), SIGROW.TEMPSENSE1 is
a correction factor for the offset (signed).
Bit 7
Access R
Reset x
Bits 7:0 – TEMPSENSE[7:0] Temperature Sensor Calibration Byte n
Refer to the ADC chapter for a description on how to use this register.
©
2018 Microchip Technology Inc.
6 5
R R
x x
4 3
TEMPSENSE[7:0]
R R
x x
Datasheet Preliminary
®
megaAVR 0-Series
Memories
2 1
R R
x x
DS40002015A-page 24
0
R
x